Characteristic of a broadband Ti:LiNbO3 optical modulator with buried electrodes and etched grooves in the buffer layer

Traveling wave Ti:LiNbO₃ Mach-Zehnder optical modulators with buried electrodes and etched grooves in the SiO₂ buffer layer are analyzed by the finite element method. The tradeoff between the bandwidth BW and the half-wave voltage Vπ is discussed. The value of BW/Vπ is used to weight the total performance of the modulator. Taking a thick buffer layer and etching deep grooves in the buffer layer are demonstrated as two effective methods to improve the performance of the modulator. A 3-dB optical bandwidth of 18 GHz with half-wave voltage 5V at a wavelength of 1.55 pm could be obtained even though the electrode is not very thick. When the requirement of half-wave voltage is not very critical, a bandwidth of more than 100 GHz can be obtained.     

Non-linearity of the interactions between bottom-up and top-down signals in multistable visual perception

Summary Both bottom-up sensory information and top-down influences contribute to the perception processes. We studied the perceptual alternations of a multistable ambiguous pattern. We observed that it is possible to interfere on the process of the perception alternance by means of subliminal visual stimuli, which either contrast or second the previous perception. We investigated also the effect of the top-down volitional factor on the perceptual alternation. By using a combination of such top-down factor and bottom-up stimulation, we ascertained that a non-linear type of interaction occurs between the two above factors. Paper presented at the International Workshop ?Fluctuations in Physics and Biology: Stochastic Resonance, Signal Processing and Related Phenomena?, Elba, 5–10 June 1994.     

用锌有机源和CO2/H2混合气源PECVD沉积ZnO薄膜

在等离子体作用下,以CO2/H2混合气为氧源,Zn(C2H5)2锌为锌源,在单晶硅上生长出高度择优取向的氧化锌薄膜。X射线衍射分析表明,薄膜为六方结构,c轴高度择优;原子力显微镜观察到晶粒是有规律地按六方排布,薄膜的表面粗糙度较小;从光致发光谱还发现在380 nm处有非常强的紫外峰。     

Radio-frequency controllable quantum interference in Mössbauer spectroscopy

The role of quantum interference (QI) in spectra of the resonant Mössbauer scattering is investigated. As a mechanism ensuring the QI conditions, the radio-frequency (RF) mixing of the spin sublevels of the excited nuclear state is considered. It is shown that QI leads to a significant intensity redistribution of the elastic and Raman scattering.     

LiNbO3∶Cr∶Cu晶体吸收特性及非挥发全息存储研究

研究了LiNbO3∶Cr∶Cu晶体的吸收特性,发现LiNbO3∶Cr∶Cu（含0.14 wt.% Cr2O3 和 0.011 wt.% CuO）晶体存在两个明显的吸收峰,中心波长分别位于480 nm和660 nm; 随着Cr的含量逐渐减小,Cu的含量逐渐增大,短波段不存在明显吸收峰,掺Cr的含量越大,中心波长在660 nm处的吸收越大；633 nm红光虽然位于中心波长为660 nm的吸收峰内,但它无助于光折变过程.分别采用390 nm紫外光和488 nm蓝光作为敏化光,514 nm绿光作为记录光的记录方案,实现了非挥发全息记录,掺入适量的Cr( 比如NCr=2.795×1025 m－3,NCr/ NCu=1)有助于全息记录性能的提高.     

非对称三态叠加多模泛函叠加态光场的高次压缩——广义电场分量的不等幂次和压缩效应研究

多模真空态|{0j}〉q与两个空间强度分布特征不同的多模复共轭泛函相干态|{f(j a)*(x,y,z)}〉q和|{f(j b)*(x,y,z)}〉q的线性叠加组成的三态叠加多模泛函叠加态光场|ψ(f3)〉q,利用多模压缩态理论,研究了态|ψ(f3)〉q中广义电场分量的不等幂次高次和(H)压缩特性.结果表明:在一定的条件下,态|ψ(f3)〉q的广义电场分量可呈现出周期性变化的任意奇数次和任意偶数次的不等幂次高次H压缩效应;光场的经典振幅和经典初始相位的任意非对称空间分布特征对其压缩程度和压缩深度等压缩特性将产生直接的影响.     

280mm×280mm口径单脉冲过程电光开关

用于高功率惯性约束聚变(ICF)激光驱动器的大口径电光开关均采用等离子体电极泡克耳斯盒。与传统的等离子体电极电光开关原理不同,单脉冲过程驱动电光开关没有独立的大电流等离子体发生单元,而只是通过具有较高幅值的正负开关脉冲完成对大口径电光开关的驱动。介绍单脉冲过程驱动等离子体电极泡克耳斯盒电光开关的设计,并建立280 mm×280 mm口径电光开关实验平台,利用连续激光器测试了电光开关特性,实验测得该电光开关中心处开关效率为99.3%,开关上升时间为90 ns。     

低偏振相关损耗全息光栅波分复用器的设计

对基于掺杂铌酸锂材料的体光栅波分复用器主要结构和光栅记录参量提出了一种优化设计方法.采用严格耦合波理论,对两种偏振不同入射角和不同记录晶体厚度下的器件关键性能参量,如插入损耗和偏振相关损耗等进行了优化.数值结果证明采用优化设计的晶体厚度和光栅记录时的入射角,在获得相当低的偏振相关损耗的同时,也能够获得较低的插入损耗,实现了综合性能优化的波分复用器设计.实验结果证明用优化设计的参量能有效降低波分复用器件的插入损耗和偏振相关损耗.     

自由曲面光学虚拟制造与检测系统的探讨

自由曲面光学产品设计、制造与检测的工艺流程，通常采取试凑法逐次逼近。由于加工 检测 再加工，循环往复，既费时，成本又高，产生了瓶颈问题。为了解决此弊端，本文运用虚拟制造技术，提出光学虚拟制造的基本构想，即虚拟制造系统结构模型，给出光学系统虚拟原型的构成和光学系统成像质量虚拟检测系统的构成，讨论光学成像质量的仿真检测以及敏度分析方法。研究结果表明：运用虚拟制造与检测技术，可缩短研发周期，降低成本，优化工艺并提高产品质量。     

新型高准确度光纤光栅压力传感系统

提出一种使用光纤双布喇格光栅测定压力的测量方法.在外界压力作用下，传感光纤布喇格光栅反射波长的漂移,被转变成在交变力策动下,发生弯曲的等强度悬臂梁调制扫描光栅反射光脉冲间隔的变化.实验结果表明，光纤布喇格光栅反射波长漂移的测量范围为0～3 nm，波长测量的不确定度为1 pm；压力传感器的量程为0～6 MPa时，压力的测量不确定度为0.005 Mpa.